GT3576R FG XR6 Turbo G6E Supercore Ford territory Garrett XR6T Barra FPV

GT3576R FG XR6 Turbo G6E Supercore Ford territory Garrett XR6T Barra FPV

 

 

 

GT3576R or GT3582R Supercore BA BF FG FGX XR6 Turbo G6E Aus Turbo Garrett XR6T

This listing is for a GT3576R or GT3582R supercore which includes a brand new OEM spec compressor housing, brackets & the CHRA installed.

The turbine housing is not included in the sale.

100% Aussie seller, Aussie built here in Australia!

contents

GT3576R supercore

Aus Turbo CHRA parts fitted:

-oem spec compressor housing

-oem brackets

-circlip

-Complete ball bearing GT3576R CHRA

-New high quality Ceramic ball bearing   cartridge with

-brass cages (or Peek).

-New rings upgraded Stepped back

-New seals

-New heat shield

-New back seal plate

-New 11 blade billet compressor wheel.

-New 9 blade performance high flow turbine wheel or optional OEM 10blade

-New Upgraded High flow oil restrictor

-New upgraded core bearing housing

-VSR balanced

Personal testing & customer feedback

(Fast spool, aggressive boost, some described as savage)

Very good spool time from lower RPM range & very aggressive mid range to higher rpm performance)

This is my personal favourite and is suitable for standard or modified barras.

This is a straight bolt on upgraded stage 3 supercore that requires no modifications to your turbine housing.

No you won't log check engine lights or mess up your standard tune providing you run standard boost, standard boost actuator.

This is the best bang for your buck, we have tested these and they make big difference in performance when compared to the standard Garrett CHRA.

What you will notice, faster spool, nicer sound on boost, faster & harder boost guaranteed, amazing increase in performance!

The bearing housing is a brand new upgraded aftermarket type, it's stronger then the original & the oil feed holes are slightly larger for better oil flow & less chance of oil starvation.

This Turbo Supercore suits Ford Falcon FG XR6 turbo, G6E turbo.

This Supercore can fit vehicles with the larger GT3582r such as BA BF XR6 turbo or F6 typhoon where customers are chasing a more responsive turbocharger.

This is an upgraded supercore for the Garrett GT3576R turbo with 11 blade billet compressor wheel & 9 impeller high flow turbine.

You have a choice of brass cages or peak cages.

Ceramic ball bearings are used for more durability & slightly faster spool (Proven to be better then steel, Garrett run Ceramic in their later model high end GTX Turbos), built to last!

Professionally built, All work carried out by qualified Australian mechanic with well over 20 years experience. 100% Positive feedback.

These AUS Turbo CHRA's are all hand built in Australia & only the highest quality parts have been used.

Please note: I have seen a number of XR6 Turbo failures due to heat as the factory garrett turbos run plastic bearing cages and steel balls, most I have seen are melted or broken on the hot side, the brass bearing cages alone are an upgrade and the ceramic balls take a lot more heat.

In some other cases failures are due to lack of lubrication, lack of oil changes which causes sludge build up.

6 Months limited warranty from date of sale.

Terms and conditions of warranty.

You must not exceed 20psi boost pressure.

You must run a blow off valve.

Vehicle must be serviced every 5000km to 10,000km or 6 months. Proof of service will need to be provided.

A good quality full synthetic oil must be used such as Penrite 5w-40.

Warranty does not cover abuse, over boosting, oil starvation or sludge build up in engine!

You must check that there is adequate oil supply & a new braided oil line with a filteration device must be fitted, no exceptions!

There is a little filter/strainer on the oil pressure switch side of feed line that needs to be removed or replaced also.

Replacement part warranty only.

Warranty will not cover labour or any other cost incurred.

The CHRA/Supercore will need to be sent back to us for inspection before accepting liability for warranty.

Free local pick up in western sydney or can post Australia wide.

Thank you.