GT3576R 11/9 HP CHRA FG XR6 Turbo Suit Garrett FPV G6E XR6T Ford Barra upgrade Ford

Have seen customers make approximately 350RWKW with 780NM of torque on 98 fuel, potential for more especially on E85.

If you're looking for higher peak numbers our Aus Turbo GT3582R High performance CHRA has seen figures of 506RWKW & 1098NM of torque at 16psi boost on E85 with supporting engine mods. It would make less on 98 ron fuel.

(Fast spool, aggressive boost, some described as savage)

Very good spool time from lower RPM range & very aggressive mid range to higher rpm performance)

This is my personal favourite and is suitable for standard or modified barras.


Brand New Aus Turbo Performance CHRA suit Garrett Turbo GT3576R. (Ball bearing turbo)


Please note the image with a complete turbo is so you can see how these GT3576R look fitted & the additional items are not included in the sale.


This is a straight bolt on upgraded stage 3 CHRA that requires no modifications to your original compressor housing & turbine housing.


No you won't log check engine lights or mess up your standard tune providing you run standard boost, standard boost actuator.


This is the best bang for your buck, we have tested these and they make big difference in performance when compared to the standard Garrett CHRA.

What you will notice, faster spool, nicer sound on boost, faster & harder boost guaranteed, amazing increase in performance!


The bearing housing is a brand new upgraded aftermarket type, it's stronger then the original & the oil feed holes are slightly larger for better oil flow & less chance of oil starvation.


This Turbo CHRA suits Ford Falcon FG XR6 turbo, G6E, Ford Territory.

(This CHRA will not fit vehicles with the larger GT3582r such as BA BF XR6 turbo or F6 typhoon)


This is an upgraded CHRA for the Garrett GT3576R turbo with 11 blade billet compressor wheel & 9 or 10 blade impeller high flow turbine ask prior to purchasing if you would like to choose the specification.

You have a choice of brass cages or peak cages.

Ceramic ball bearings are used for more durability & slightly faster spool

(Proven to be better then steel, Garrett run Ceramic in their later model high end GTX Turbos), built to last!


Aus Turbo CHRA parts fitted:

-New high quality Ceramic ball bearing cartridge with

-brass cages (or Peek).

-New rings (Upgraded Stepped back on turbine side)

-New seals

-New heat shield

-New back seal plate

-New 11 blade billet compressor wheel.

-New 9 or 10 blade performance high flow turbine wheel

-New Upgraded High flow oil restrictor

-New upgraded core bearing housing

-VSR balanced


This Aus Turbo CHRA Feels nice & firm like a brand new Garrett turbocharger is meant to feel, spins nice & free.

Professionally built, All work carried out by qualified Australian mechanic with well over 20 years experience. 100% Positive feedback.


These AUS Turbo CHRA's are all hand built in Australia & only the highest quality parts have been used.


Please note: I have seen a number of XR6 Turbo failures due to heat as the factory garrett turbos run plastic bearing cages and steel balls, most I have seen are melted or broken on the hot side, the brass bearing cages alone are an upgrade and the ceramic balls take a lot more heat.

In some other cases failures are due to lack of lubrication, lack of oil changes which causes sludge build up.

Factory oil feed line must be replaced, it's recommended to fit a braided type with a filtration device.

There is a little filter/strainer on the oil pressure switch side of feed line that needs to be removed or replaced also.


I reserve the right to end listing at anytime without notice as I have it advertised elsewhere including Ebay & Facebook.


Any questions I'll be more then happy to answer. Thanks for looking


6 Months limited warranty from date of sale.


Terms and conditions of warranty.

Vehicle must be serviced every 5000km to 10,000km

or 6 months. proof of service will need to be provided.

A good quality full synthetic oil must be used such as Penrite 5w-40.


Warranty does not cover abuse, oil starvation or

sludge build up in engine!

You must check that there is adequate oil supply

& a new braided oil line with a filteration device must

be fitted, no exceptions!

Replacement part warranty only.